Model NO.: LT-DH-8
Cutting Thickness: 51-300mm
Cutting Speed: 0-1000mm/min
Gas: Oxyfuel Gas
Current and Voltage: DC 24V
Name: Ignition Device Transformer
Cable Length: 1.5 M/2m/1.8m
Mode: CNC
Application: Ignition Device Transformer
Plasma Source: Flame
Driving Form: Electric
Trademark: Longteng
Transport Package: Carton, Wooden Case
Specification: CE, ISO
Origin: Wuxi, China (Mainland)
HS Code: 8515900000
Model NO.: LT-DH-8
Cutting Thickness: 51-300mm
Cutting Speed: 0-1000mm/min
Gas: Oxyfuel Gas
Current and Voltage: DC 24V
Name: Ignition Device Transformer
Cable Length: 1.5 M/2m/1.8m
Mode: CNC
Application: Ignition Device Transformer
Plasma Source: Flame
Driving Form: Electric
Trademark: Longteng
Transport Package: Carton, Wooden Case
Specification: CE, ISO
Origin: Wuxi, China (Mainland)
HS Code: 8515900000
Ignition device transformer, spark transformer for CNC flame Cutting machine
High Voltage Transformer, Voltage Transformer for Ignition System

High Voltage Transformer, Voltage Transformer for Ignition System
1) Quick Detail:
1. Ignition device transformer
2. Use for ignition and spark beside the flame cutting torch
3. Equipped with solenoid valve and high-voltage unit

2)Structural Features:
1. Ignition device transformer Using high frequency discharge ignition circuit and arc temperature is higher, easy to ignite the gas.
2. Cutting machine ignition device is durable because of the special craft processing.
3. The gas solenoid valve and discharge are synchronously controlled, which can reduce waste.
4.100% inspection on critical dimensions with high accuracy +/-0.01-0.005mm

3) Applications:
Cutting machine ignition device is Used for CNC Flame Gantry Cutting Machine and the CNC Portable Cutting machine.
Beside the cutting torch, it achieves the convenience with the automation design, which could avoid using the lighter for igniting the oxy-fuel cutting torch.

4)Working Principles:
1. Ignition device transformer is equipped with solenoid valve and high-voltage unit, which is installed on the cutting torch to adjust the distance between the cutting nozzle and ignition source.
2. When power is on, with the help of the solenoid valve the high-voltage unit will bring about fire source, which will meet with the fire hole of the cutting nozzle to realize ignition.
3. By using the cutting machine ignition device, which makes it easier to work, and can improve efficiency and reduce the inefficient combustion time of the cutting nozzle.
4. The small holder has two kinds 30mm and 32mm, which according to the O. D. Of the cutting torch for the machine use.
5. The high voltage unit is the transformer, which could transform the low voltage into the high voltage, then get the spark and ignition function, when the sparkle meet the fuel gas, which will get flame to ignite the cutting tip for cutting.

1> Standard Configuration
Holder: 1
High-voltage unit: 1
High-voltage cable: 1 (1.5 M)
Flashback arrestor: 1
Gas valve: 1
Solenoid valve: 1
Gas inlet assembly: 1
Copper connecting terminal: 1

A). DC24V power supply, with safe and reliable aviation connector
B). High pressure electronic igniter is used
C). Special mini-valve control is designed
D). Acetylene back flash arrester ensures no back flash impact the main gas supply pipe
E). 1/4"-LH or 6mm connector is adopted

5)Maintenance Skills:
1. Install the cutting machine ignition device correctlly.
2. Replace the consumbles in time before completely damaged.
3. Keep the connection threads of spare parts clean.
4. Keep the contact area of betwween the Copper connectors.
5. Check if there are loose parts.

Model Number
 
LT-DH-03
 

Brand Name
 
Longteng, OEM
 

Place of Origin
 
Wuxi, China (Mainland)
 

Certification
 
CE,ISO
 

Loading Port
 
FOB Shanghai
 

Payment Terms
 
T/T, L/C, Western Union
 

Supply Ability
 
2000 pieces/month
 

Current and Voltage
 
DC 24V
 

Cable length
 
1.5 M/2M/1.8M
 

control mode
 
CNC
 

plasma source
 
Flame
 

Driving form
 
Electric
 
Ignition device transformer, spark transformer for CNC flame Cutting machine
High Voltage Transformer, Voltage Transformer for Ignition System

High Voltage Transformer, Voltage Transformer for Ignition System
1) Quick Detail:
1. Ignition device transformer
2. Use for ignition and spark beside the flame cutting torch
3. Equipped with solenoid valve and high-voltage unit

2)Structural Features:
1. Ignition device transformer Using high frequency discharge ignition circuit and arc temperature is higher, easy to ignite the gas.
2. Cutting machine ignition device is durable because of the special craft processing.
3. The gas solenoid valve and discharge are synchronously controlled, which can reduce waste.
4.100% inspection on critical dimensions with high accuracy +/-0.01-0.005mm

3) Applications:
Cutting machine ignition device is Used for CNC Flame Gantry Cutting Machine and the CNC Portable Cutting machine.
Beside the cutting torch, it achieves the convenience with the automation design, which could avoid using the lighter for igniting the oxy-fuel cutting torch.

4)Working Principles:
1. Ignition device transformer is equipped with solenoid valve and high-voltage unit, which is installed on the cutting torch to adjust the distance between the cutting nozzle and ignition source.
2. When power is on, with the help of the solenoid valve the high-voltage unit will bring about fire source, which will meet with the fire hole of the cutting nozzle to realize ignition.
3. By using the cutting machine ignition device, which makes it easier to work, and can improve efficiency and reduce the inefficient combustion time of the cutting nozzle.
4. The small holder has two kinds 30mm and 32mm, which according to the O. D. Of the cutting torch for the machine use.
5. The high voltage unit is the transformer, which could transform the low voltage into the high voltage, then get the spark and ignition function, when the sparkle meet the fuel gas, which will get flame to ignite the cutting tip for cutting.

1> Standard Configuration
Holder: 1
High-voltage unit: 1
High-voltage cable: 1 (1.5 M)
Flashback arrestor: 1
Gas valve: 1
Solenoid valve: 1
Gas inlet assembly: 1
Copper connecting terminal: 1

A). DC24V power supply, with safe and reliable aviation connector
B). High pressure electronic igniter is used
C). Special mini-valve control is designed
D). Acetylene back flash arrester ensures no back flash impact the main gas supply pipe
E). 1/4"-LH or 6mm connector is adopted

5)Maintenance Skills:
1. Install the cutting machine ignition device correctlly.
2. Replace the consumbles in time before completely damaged.
3. Keep the connection threads of spare parts clean.
4. Keep the contact area of betwween the Copper connectors.
5. Check if there are loose parts.

Model Number
 
LT-DH-03
 

Brand Name
 
Longteng, OEM
 

Place of Origin
 
Wuxi, China (Mainland)
 

Certification
 
CE,ISO
 

Loading Port
 
FOB Shanghai
 

Payment Terms
 
T/T, L/C, Western Union
 

Supply Ability
 
2000 pieces/month
 

Current and Voltage
 
DC 24V
 

Cable length
 
1.5 M/2M/1.8M
 

control mode
 
CNC
 

plasma source
 
Flame
 

Driving form
 
Electric
 

DHK019 CNC Stator Grinding Machine  using interpolation curve of stator inner hole CNC system, a high degree of automation, product for the user the retrofit of a few product design provides convenient. Axis C is a servo motor by no clearance reduction gear drive shaft rotation, closed loop control, makes the grinding wheel profile error is further reduced. Grinding wheel Spindle adopts frequency control of motor speed motorized spindle

CNC Stator Grinding Machine

CNC Stator Grinding Machine,CNC Stator Grinder Machine,High Speed CNC Stator Grinding Machine,Large CNC Stator Grinding Machine

NingXia DaHe Machine Tool (Group) Imp And Exp Co.,Ltd , https://www.nxdhjcmachine.com

April 18, 2020