In 2015, Hankook Tire became the official tire supplier for the FIA ​​F3 European Championship (hereinafter referred to as “F3 European Championshipâ€) for the fourth consecutive year. This year's event was staged at the Silverstone circuit in the UK from April 10th to 12th. There are 35 racers from 17 countries, each with a different car. As the official designated tire supplier, Hankook Tire is fully equipped with the “Enhanced Racing Tire†specially developed for this event, with the most enhanced quality and performance to help the most potential drivers, competing in the most challenging track competition. , to launch a strong impact on the champion.
The hollow paddle dryer is a horizontal structure drying equipment with heat conduction.
The drying of the equipment relies on indirect heating by heat conduction. so the drying process requires no or only a small of gass to remove moisture. It greatly reduce the heat loss taken away by the airflow, inproves the heat utilization rate, and is an energy-saving drying equipment. The paddle dryer is widely used in the drying of powder, granular, filter cake and slurry materials in petrochemical, chemical, metallurgy, food, medicine, pesticine and other industries.Indirect heating or cooling of paste, granular, powder and slurry materials can complete unit operations such as drying, cooling, heating, sterilization, and reaction. The special wedge-shaped stirring heat transfer blade in the equipment has high heat transfer efficiency and self-cleaning function of the heat transfer surface.
Principle:
The heat transfer surface of the hollow paddel dryer has several parts such as blades, stirring shafts, and a large heat transfer area per unit volme. In addition, stirring and mixing make the materials violently turn, so as to obtain a high heat transfer coefficient, so the floor space and space are very small, saving the cost of plant infrastructure. In the drying process, the gas consumption is small. the flow rate is low. and the amount of dust carried away by the gas is small, so the gas dust recovery after drying is comvenient, and the recovery equipment in small in size, which can save equipment investment. For drying processes that require solvent recovery, the solvent concentration can be greatly increased. Due to the special stracture of the paddle, the material is alternately squeezed and relaxed during the drying process, which strengthens the drying process. The filling rate of the material in the drying room is very high, which can reach 80%-90%. The residence time of the material can be adjusted by adjusting the parameters such as the feeding speed, the rotating speed of the stirring shaft, and the filling degree of the material, and can be adjusted arbitrarily from a few minutes to a few hours. In addition, the movement of the material from the feeding port to the discharging port in the dryer is basically a piston motion, and the residence time distribution is narrow, so the moisture content of the product is uniform. The paddle has a certain axial angle on the stirring shaft, so it can continuously dry the material.
Features:
The equipment has a compact structure, a small footprint, and a large effective heat transfer area: a large heat transfer surface per unit of eccective volume.
The balde shafts can be meshed with each other, which has a self-cleaning effect and can prevent materials from sticking to the wall.
Low energy consumption per unit evaporation, low operating cost, indirect heating, closed heating, heating the material partition, high energy efficiency and utilizaion.
The low speed of the blade shaft does not damage the shape and properties of the product.
The operation of the equipment is flexible, the operation is stable and reliable, it can be operated continously or intermittently, and it can be applied in many fields.
Hollow Paddle Dryer,Hollow Blade Dryer,Hollow Paddle Drying Machine,Hollow Paddle Dryer Machine Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com
The F3 European Championship, which is the same as the German Touring Car Masters (DTM), is the world's largest F3 car race, which is held annually between different tracks in Europe. In 2013, following the “F3 European Series†and “British F3 Eventsâ€, the “F3 European Championship†was upgraded to a higher level international competition, which attracted a number of quality racing drivers to experience, such as Michael Schumacher. World-class F1 racers such as Sebastian Vettlel and Lewis Hamilton started.
Since 2012, Hankook Tire has formed an alliance with this prestigious event and signed a five-year sponsorship contract. As an official tire supplier, Hankook Tire promises to develop and market different types of Ventus series of racing tires, such as the Ventus Race Formula F200, which is most suitable for the Formula Race. And the wetland special tire Ventus (Wan Tu Shi) Z207.
“As the main sponsor of the F3 European Championship, Hankook Tire has been focusing on the development of racing tires tailored for the F3 race. Therefore, our latest racing tires are fully considered the technical rules of F3 itself and the FIA ​​guidelines. The collection of cutting-edge technology is specially designed.†Hankook Tire President and CMO, CCMO Zhao Xianfan said, “Based on the technology of Ventus tires, Hankook Tire will continue to invest in research and development and develop more High-quality civilian tires deliver the ultimate driving experience to consumers."
Hankook Tire has been actively participating in and sponsoring a variety of top car events. In addition to the “F3 European Championshipâ€, Hankook Tire is the official sponsor and exclusive tire supplier for a series of internationally renowned auto events such as DTM and “24 Hours Endurance Raceâ€. These events provide a good platform for Hankook Tire to showcase its leading technology and superior quality.
August 02, 2023