PRODUCTION OF PLASTIC MOULDS:
More services we offer:
Features of Mini Quadcopter Drone toy:
1.4ch: up/down, forward/ backward,60degree roll over,run on the ground, high-altitude flight
Flying Car Drone,Rc Car Drone,Flying Car Drone With Camera,Flying Car Drone Toy Timeplex Industrial Limited , https://www.hktimeplex.com
Electromagnetic flowmeter installation requirements:
1. Flowmeters that are common in the market now belong to unidirectional flowmeters. The titanium anode plate must be clearly seen when installing electromagnetic flowmeters. Water supply equipment 2, electromagnetic flowmeter converter (head) can not be installed down.
3. Installation location: Permitted to be installed in horizontal or vertical pipelines. Horizontal pipelines must be required to make joints for upward movements at outlets or outlets. The vertical pipe must be installed on the pipe where the liquid moves upwards.
4. Requirements for straight sections before and after: Under normal circumstances, the straight sections before and after are required to be 5D after the first 10D (ie, the first 10 times is 5 times the diameter after the diameter). Special occasions can be reduced or increased.
Correct installation of electromagnetic flowmeter, titanium anode correct product selection:
1. Selection of Electromagnetic Flowmeter Electrodes Problem: Electrodes are selected according to different media, commonly used 316 stainless steel electrodes, corrosive occasions have different titanium electrodes, Hastelloy electrodes, tantalum electrodes, nickel electrodes, platinum electrodes For different electrodes, users can choose according to different corrosiveness.
2, the medium temperature can not be too high, frequency conversion water supply currently used Teflon material lining or polyurethane rubber lining ht, annealing furnace nitrile rubber lining maximum temperature of 200 degrees.
3, should measure the characteristics of electromagnetic flowmeter, the medium must be conductive liquid, conductivity must be greater than 5us/cm.
4. Electromagnetic flowmeters used in high-pressure applications must be watchful and provide the appropriate pressure when ordering. The pressure is divided into the pressure of the pipeline and the actual pressure of the fluid.
We process orders of international customers in the area of mold making, plastic molds of China, not only in large quantities but also in a short time. For the production of plastic molds China, we use small and large machines to produce state-of-the-art plastic injection molds. In the manufacturing process we can rely on many different materials such as thermoplastics, thermosetting polymers, metals and glass.
Besides of Metal Stamping Components,the Amplifiers metel chassises and Panels, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.
3.Camera:0.3 mega camera
4. Color optional: Black
This "Fly Car" is our unique land mode and air mode combined into one Aerial drone design. It can not only run happily on land, but also in the air race. Let the majority of players to achieve the dream of Car Racing in the air!!!
Key Features:
Camera:480P/720P/Wifi FPV Screen(optional)
RC functions:6-axis gyroscope,LED Lights,Auto-return, Altitude hold.
Teach you how to install the electromagnetic flowmeter:
September 01, 2023