Model NO.: ADVU
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Trademark: VPC Pneumatic
Origin: China
Model NO.: ADVU
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Trademark: VPC Pneumatic
Origin: China
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder

  1.Smart appearance,save the space

  2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage

  3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation

  4.Good replacement for the FESTO same type.

Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.
ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:  double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
Bore(mm) 16 20 25 32 40 50 63 80 100
Action Double acting, single rod/double rod
Fluid Filtered compressed air
Ensured Pressure Resistance 1.5MPa
Operating
pressure range
ADVU - -P-A 0.12~1.0MPa 0.1~1.0MPa 0.08~1.0MPa 0.06~1.0MPa
ADVU - -P-A-S2 0.13~1.0MPa 0.12~1.0MPa 0.1~1.0MPa 0.8~1.0MPa
Ambient and fluid temperature -20~80 (No freezing)
Port size M5 G1/8" G1/4"
Piston rod thread Female thread M4 M5 M6 M8 M10 M12
Male thread M8 M10×1.25 M12×1.25 M16×1.5 M20×1.5
Cushion Rubber bumper
 

Other Compact/Thin Cylinders are also available for you:

SDA series Thin Cylinder

CQ2 series Compact Cylinder

Our company also can provide other pneumatic cylinders as below,

1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)

2.Standard cylinder:SC/SU,MB,CA1

3.Mini cylinder:MA,MAL,CJ2,CM2,CJP

4.Double-shaft cylinder:TN,CXS

5.Free installation cylinder:CU

6.Slide bearing cylinder:STM

7.Three-shaft cylinder:MGP

8.Stopper cylinder:RSQ

9.Clamp cylinder:XCK

10.Rotary cylinder:MSQ

11.Rodless cylinder:CY1

12.Air gripper:XHZ2/XHC2,XHL2,XHT2

More information and details,you can contact us and visit our website.

If you have the nonstandard products want to design,don't hesitate to contact us.
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder

 

 

ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder

  1.Smart appearance,save the space

  2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage

  3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation

  4.Good replacement for the FESTO same type.

Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.
ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:  double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
Bore(mm) 16 20 25 32 40 50 63 80 100
Action Double acting, single rod/double rod
Fluid Filtered compressed air
Ensured Pressure Resistance 1.5MPa
Operating
pressure range
ADVU - -P-A 0.12~1.0MPa 0.1~1.0MPa 0.08~1.0MPa 0.06~1.0MPa
ADVU - -P-A-S2 0.13~1.0MPa 0.12~1.0MPa 0.1~1.0MPa 0.8~1.0MPa
Ambient and fluid temperature -20~80 (No freezing)
Port size M5 G1/8" G1/4"
Piston rod thread Female thread M4 M5 M6 M8 M10 M12
Male thread M8 M10×1.25 M12×1.25 M16×1.5 M20×1.5
Cushion Rubber bumper
 

Other Compact/Thin Cylinders are also available for you:

SDA series Thin Cylinder

CQ2 series Compact Cylinder

Our company also can provide other pneumatic cylinders as below,

1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)

2.Standard cylinder:SC/SU,MB,CA1

3.Mini cylinder:MA,MAL,CJ2,CM2,CJP

4.Double-shaft cylinder:TN,CXS

5.Free installation cylinder:CU

6.Slide bearing cylinder:STM

7.Three-shaft cylinder:MGP

8.Stopper cylinder:RSQ

9.Clamp cylinder:XCK

10.Rotary cylinder:MSQ

11.Rodless cylinder:CY1

12.Air gripper:XHZ2/XHC2,XHL2,XHT2

More information and details,you can contact us and visit our website.

If you have the nonstandard products want to design,don't hesitate to contact us.
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder
ISO21287 Standard Advu Series Pneumatic Air Cylinder

 

 

Shoe Polish & Care Kit

At present, there are three kinds of Shoe Polish on the market: emulsified oil, pure oil and liquid shoe polish. The composition and characteristics of these three kinds of shoe polish are different, so they should be used selectively. In addition to applying shoe polish, the care of leather shoes also includes water prevention, dust prevention and moisture prevention. Failure to do a good job may affect the wearing of leather shoes.

The Shoe Polish & Care Kit includes shoe polish, leather cream, microfiber towels, brushes and other cleaning and maintenance products, which can solve the problem of dirt and aging of leather shoes in a one-stop manner.

1. Shoe polish (in various colors)
2. Shoe brush (for removing dirt and applying polish)
3. Shoe shine cloth (for buffing and shining)
4. Leather conditioner (to keep the leather soft and supple)
5. Water and stain repellent spray (to protect the shoes from water damage and stains)
6. Shoe trees (to help maintain the shape of the shoes)
7. Suede brush (for cleaning and restoring suede shoes)
8. Shoe horn (to help put on shoes without damaging the heel)
9. Shoe bag (for storing and protecting the shoes when not in use)
These items can be purchased separately or as a kit, depending on personal preference and budget.



Shoe Polish & Care Kit,Shoe Polish Cream Kit,Shoe Shine Kit,Leather Shoe Cleaning Kit

Jiangyin yinghuameng Houseware Co.,Ltd. , https://www.yhmcarcare.com