1. Pre-sale support Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.  On-site inspection 2. After-sale service  Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.  Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of their new plant. Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technician. Dimensional drawings together with service requirements will be provided prior to delivery of the equipment, which make time for our customer to prepare the site and commence production in time. 3. Technical support  Shredwell provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
HONYFLUO®PTFE sheet or rod (chemical name is polytetrafluoroethylene, commonly known as Teflon) is a semi-crystalline fluoroplastic with many unique properties. It has very high thermal stability and chemical resistance, as well as a high melting point (-200 to +260°C, short-term up to 300°C). In addition, PTFE products have excellent sliding properties, excellent electrical resistivity and non-stick surface. However, compared with other plastics, this material has lower mechanical strength and higher specific gravity. PTFE plastic can be modified by adding glass fiber, carbon or bronze to improve the mechanical properties of the material. Due to its structural characteristics, PTFE is usually compression molded, and then the material is machined with cutting/processing tools
Teflon Sheet Rod Feature
Very high chemical resistance
Excellent high temperature resistance
(-200+260°C, short-term up to 300°C)
Very low coefficient of friction
Very low surface tension (almost no material will stick to PTFE, it is difficult to stick or weld)
High thermal expansion coefficient
Relatively low strength/rigidity
Low dielectric constant
Flame retardant
PTFE is one of the most commonly used and most important fluorine-containing plastics and is widely used in various application fields. It is a commonly used material in sliding applications, especially in environments where components need to withstand chemical stress.
Teflon sheet rod target Industry
Aerospace Technology
Chemical Technology
Food technology
Low temperature engineering
Mechanical engineering
Electronic Semiconductor Technology
As a wear-resistant seal, it is used in turbines. In unfavorable chemical environments, seals and shields made of HONYFLUO®PTFE tubing have reliable performance and greatly improve the efficiency of turbomachinery. (Replace the previous materials: aluminum, bronze, babbitt alloy)
Because the performance and life are significantly better than other PTFE, the transmission and power steering seals processed by HONYFLUO®PTFE have been widely used by top European car manufacturers. (Replace the previous material: GF PTFE)
Fluorosint® Family
The Fluorosint® range of enhanced PTFE materials was developed to fill the performance gaps where unfilled as well as low-tech, filled PTFE-based polymers underperform. Each Fluorosint® material was specifically designed to excel in demanding bearing and seal applications. While each of Fluorosint® grade possesses the great chemical resistance and compliance of standard PTFE, each material offers unique properties resulting from our proprietary process in which we chemically link synthetically manufactured mica to virgin PTFE. These enhancements give individual Fluorosint® grades superior performance properties, ranging from outstanding dimensional stability, to improved wear performance, to higher load bearing capabilities.
Fluorosint® 135 PTFE
Polytetrafluoroethylene
Fluorosint® 135 is a PTFE material formulated to provide the lowest coefficient of friction and deformation for use in demanding seal, bearing, and washer applications. This grade also possesses excellent strength, stiffness, and high-pressure velocity capabilities. Additionally, Fluorosint® 135 PTFE exhibits high mechanical performance at elevated temperatures, making this grade ideal for wear applications where extreme conditions are present.
Material Properties
Lowest possible coefficient of friction and deformation
Excellent strength and stiffness
High pressure velocity capabilities
High mechanical performance at elevated temperatures
Fluorosint® MT-01 PTFE
Polytetrafluoroethylene
Fluorosint® MT-01 is an extreme PTFE grade that was specifically developed for engineering applications where the low-friction and high-temperature benefits of PTFE-based materials also require outstanding strength, stiffness, and stability. Often specified in seat, seal, and wear applications where extreme thermal conditions are present, Fluorosint® MT-01 PTFE delivers superior mechanical performance at elevated temperatures.
Material Properties
Excellent strength and stiffness
Excellent stability in high temperature applications
Great friction behavior typical of PTFE
Fluorosint® 500 PTFE
Polytetrafluoroethylene
Fluorosint® 500 Polytetrafluoroethylene PTFE shapes possess a unique combination of stability and wear resistance, for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint® 500 PTFE exhibits outstanding chemical and hydrolysis resistance, and excellent mechanical and tribological properties. Additionally, Fluorosint® 500 PTFE`s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.
Material Properties
Most dimensionally stable PTFE-based product
Chemical resistance parallels PTFE
Continuous use temperatures to 500° F / 260° C
Excellent mechanical and tribological properties
Lower coefficient of thermal expansion
Fluorosint® HPV PTFE
Polytetrafluoroethylene
Fluorosint® HPV is an FDA compliant, high-performance, bearing grade PTFE material. Optimized for high-pressure velocity and low k-factor, Fluorosint® HPV was developed specifically for bearing applications where other PTFE formulations typically exhibit premature wear. Ideal for food processing and pharmaceutical applications, Fluorosint® HPV`s FDA compliance gives equipment manufacturers new design options for load-bearing and wear applications.
Material Properties
Low k-factor for excellent wear resistance
High pressure velocity material with excellent load bearing capacity
FDA compliant
Fluorosint® 207 PTFE
Polytetrafluoroethylene
Fluorosint® 207 Polytetrafluoroethylene PTFE is a Food Contact Compliant grade of Fluorosint® with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties, and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint® materials, Fluorosint® 207 PTFE shapes excel in food, pharmaceutical, and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and Food Contact Compliance may be required.
Material Properties
Chemical and hydrolysis resistance
Dimensional stability
Creep resistance
Exceptional sliding and wear properties
Lowest coefficient of friction of all Fluorosint® materials
Ptfe Sheet Round Bar,PTFE sheet rod,PTFE sheet,PTFE rod,F4 PVDF sheet rod,PTFE board,Polytetrafluoroethylene Hony Engineering Plastics Limited , https://www.honyplastic.com
Shredwell granulator turns the input material into rubber crumb. It's a high speed,single shaft granulator for efficient size reduction, which is ideal for processing a wide variety of materials like plastic, rubber, copper cable and aluminum scrap. 
Main feature
*Adjustable blade clearance optimizing the cutting function;
*Exchangeable blades give you an easy maintainable machine;
*Screens with different hole sizes available to ensure a more flexible production;
*Replaceable wear parts give you a tough machine;
*Individual electrical control panel with high quality Schneider components and Siemens PLC control system;
*Precision work rotors.
*Siemens motor driven granulator gurantee the quality.
Specification
Granulator
RG135
RG90
RG45
RG37
Motor
Siemens
Siemens
Siemens
Siemens
Power
135kw
90kw
45kw
37kw
Voltage
as per request
as per request
as per request
as per request
Cutting Chamber(W*L)
1080*1600mm
745*1200mm
580*1000mm
580*800mm
Dimensions(L*W*H)
2350*2810*4330mm
2150*2250*2950mm
1770*1900*2450mm
1770*1660*2400mm
Granulator Weight
9700kg
7600kg
4300kg
3650kg
Hopper opening
1050*1550*1180mm
899*1450*1160mm
600*990*920mm
600*790*920mm
Capacity
1500-2000kg/h
800-1500kg/h
500-800kg/h
300-500kg/h
Final product
1-6mm
1-6mm
1-6mm
1-6mm
Production workshop
After-sale service
Packing and shipping
1.A layer of plastic wraps to protect granulator from dust, moisture and corrosion.
2.Wooden case is used as the outside package. Or according to the customer requirements.
3.Excellant logistic team to guarantee the shredder machines to be safely shipped to customer warehouse, no extra fee on export or import on custom.
Company introduction
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery. Our equipment is based on self-owned intellectual property and has advanced European and American technology.
Â
Shredwell has now been in the shredding and recycling industry for more than 10years. Our engineering team has around 15 years experience in designing and manufacturing tire shredding machine systems. Our workforce has more than 5 years experience in manufacturing shredding machinery. Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
Â
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling systems ranging from TDS system(50-100mm output chips), TSM system(20mm output wire free chips), TSC system(1-5mm rubber crumb), TSP system(30-120mesh rubber powder),and we still offer shredder,granulator, rasper and miller...
Â
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop. Our mission is to provide our customers the best recycling solutions with high quality service and technology.
Professional rubber crumb granulator  supplier---shredwell recycling
Â
Model NO.: RG37
Power: 37kw
Cutting Chamber: 580*800mm
Granulator Weight: 3650kg
Hopper Opening: 600*790*920mm
Capacity: 0.5-0.3tons/H
Final Product: Rubber Mulch
Output Size: 1-6mm
Granulator Color: Green&Orange
Blades: Stator&Rotor
Trademark: Shredwell
Transport Package: Granulator Packed with Plastic
Specification: 1770*1660*2400mm
Origin: China
HS Code: 847780000
Hot sale rubber crumb granulator at best price(RG37)February 15, 2024