In response to the second phase of the coach control, the Ministry of Transportation and Trade undertook another heavy blow! On August 24, the Ministry of Transport issued the Notice on Strengthening the Second Phase of Law Enforcement Inspection of Vehicle Transport Vehicles. The notice pointed out that in order to further strengthen road surface law enforcement inspections, strictly control the illegal transportation of non-compliant vehicle transport vehicles, supervise and urge non-compliant vehicle transport vehicles to exit the market by stages, and completely complete the second stage of “single row of vehicles†and change to “standard vehiclesâ€. The target is to further strengthen the second phase of law enforcement inspection of vehicle transport vehicles and issue related work notices. The notification mainly involves the following four aspects: First, vehicle transport vehicles entering the highway entrance must be strictly controlled. The check and control method is to use “Vehicle Transport Vehicle Treatment APP†or “12328†WeChat public number to make inquiries, and to advise non-compliant vehicle transport vehicles that have not been declared in the declaration system and have exceeded the withdrawal period. Second, the notice states that it is necessary to ensure the smooth passage of compliant vehicle transporters. Since it is allowed to use the compliant mid-axis carriage on the road, it should be protected accordingly. In this regard, the Ministry of Communications pointed out that each toll station may not refuse to apply for a vehicle to enter the expressway or impose a penalty on the ground that it has not reported in the reporting system. Third, strict enforcement of joint punishment. Once violations of the vehicle transporter on the road are discovered, the passenger vehicle manufacturing company, the logistics vehicle company, the vehicle transporter that assumes the transportation task, and the driver of the vehicle shall be punished together. Therefore, it is better to decorate less and not to install more cars. Lastly, the Ministry of Transport hopes that all vehicle logistics companies will strengthen their self-discipline and prohibit malicious low-price competition from disrupting market order. The following is the original notice: Notice of the General Office of the Ministry of Transport on Strengthening the Second Phase of Law Enforcement Inspection of Vehicle Transport Vehicles All provinces, autonomous regions, municipalities directly under the Central Government, Xinjiang Production and Construction Corps Transportation Department (Bureau, Committee): In accordance with the "Notice of Doing Well the Second Stage of the Work on Vehicle Transport Vehicles" issued by the Ministry of Transport and Public Administration General Office of the Ministry of Transport of the Ministry of Public Transport (Delivery Letter [2017] No. 546), to further strengthen the enforcement of the road surface Examine and strictly control the illegal transportation of non-compliant vehicle transport vehicles, supervise and urge non-compliant vehicle transport vehicles to exit the market in stages, complete the second-phase “single-row vehicle†and change to “standard vehicleâ€, and further strengthen the vehicle transportation. The relevant work notice for the second phase of the law enforcement inspection of the car is as follows: I. Strict supervision of highway entrances The competent departments of communications and transportation in various localities shall supervise the operation and management units of highways within the jurisdiction and strengthen the training of the toll collectors, and use the “Approval APP for Vehicle Transport Vehicles†or “12328†WeChat public number to check and contrast the trailers of vehicle transporters at the entrance of each toll station. , Remind non-compliant vehicle transporters that have not been declared in the declaration system and exceed the withdrawal deadline, and register relevant information such as vehicle number plates. For areas where it is difficult to implement retaliation, an illegal operation notice (see Attachment 1) may be issued, signed and signed by the driver, and notified by the driver that the nearest exit will be exited from the expressway, and at the same time, the noncompliance of the illegal operation notice will be issued. Vehicle transporter related information is reported to the provincial highway management and management units (see Annex 2 for verification procedures). The provincial competent department of transportation shall collect the information in a timely manner. The non-compliant vehicle transportation vehicle information and the notification of the illegal operation of issuing the notification of illegal operation shall be copied to the competent department of transportation of the place of origin of the vehicle at regular intervals, and the competent department of transportation of the place of origin of the vehicle shall be copied. Punish illegal vehicles according to law. Second, to ensure the smooth passage of compliant vehicle carriers. The competent transportation authorities at various locations shall strengthen the publicity of flat-head articulated trains, long-head articulated trains, and mid-shaft vehicle transport trains (see vehicle attachments in Appendix 3) that meet the requirements of national standards, and ensure the smooth passage of compliant vehicle transporters. When the above-mentioned vehicles are passing highways, law enforcement officers and toll collection personnel at various locations may not refuse to enter the expressway or impose penalties on the grounds that they have not reported in the reporting system. For a mid-axle vehicle truck, the loading height is performed with reference to the vehicle carrying the standard container. Third, strict implementation of joint disciplinary All local transportation and transportation management departments shall, in accordance with the “Notice of the General Office of the Ministry of Transport of the People's Republic of China on Defining Matters Concerning Serious Undertakings, Infringing Acts, and Overloads, and Related Responsibilities,†(No. 8 of Jiao Tong Lu [2017]), severely breach the law and exceed the limit. The overloaded passenger vehicle manufacturing companies, vehicle logistics companies, vehicle transporters, and their drivers, etc., are responsible for the collection of information on illegal deceptions. The information is reported to the Ministry of Transport by the 5th of the first month of each quarter. The Ministry of Transport regularly provides the information to the various departments that signed the memorandum, and implements joint disciplinary measures against the untrustworthy parties according to law. Fourth, to strengthen auto logistics industry self-regulation China Federation of Logistics and Purchasing and other social organizations should give full play to the role of industry associations and establish an environment of mutual supervision, fair competition, win-win cooperation and healthy development, and guide vehicle logistics companies to jointly resist malicious low-price competition and disrupt market order and influence. The stable behavior of the industry will jointly maintain the normal market order for the vehicle logistics and provide an effective guarantee for the smooth progress of the governance work. Non-woven special equipment accessories
Non-woven fabric is a new type of modern material. It has a wide range of uses and can play more roles in clothing, agriculture and industry. The production of non-woven fabrics is also mostly mechanized, which makes it possible to produce a large number of non-woven fabrics in batches. Non-woven fabric winders are one of its equipment.
Non-woven fabric, also called non-woven fabric, is composed of oriented or random fibers. The production of non-woven fabrics often uses polypropylene pellets as raw materials, and is produced by a continuous one-step method of high-temperature melting, spinning, laying, and hot-pressing. In the production of non-woven fabrics, the raw materials need to be spun and formed and then processed. In the web-forming work, a non-woven web forming machine needs to be used. The web forming machine uses wind in the drafting duct to process the silk. After drafting, a machine for non-directional weaving into a net is carried out. However, polypropylene pellets are prone to broken filaments and stiff blocks during drawing, drafting, and web formation. Therefore, in order to improve the quality of the finished non-woven fabric, it is necessary to clean the formed non-woven fabric. When dealing with broken wires and stiff blocks in traditional web forming machines, workers usually use brushes or scouring pads behind the web forming machines to clean up. Because the belt width of the web forming machines is relatively long, and the conveyor belt speed is relatively high at the same time. Fast, the cleaning range that workers can cover is limited, resulting in low cleaning efficiency, which in turn affects the quality of the finished non-woven fabric.
The slitting machine is mainly used to cut large-format non-woven fabrics into multiple small non-woven fabrics of different widths for processing non-woven products. The equipment adopts DC speed regulation, feeding constant tension control, air knife slitting, rewinding pressure and other devices. The rewinding tightness after slitting is adjustable, and the slitting end surface is flat. The equipment is of high quality and beautiful appearance. It is the ideal equipment for the slitting of large non-woven fabrics. In addition, according to the needs of users, the equipment can also add a dummy cutting function, that is, the original fabric is dummy cut and then slit and rewinded.
Non-woven fabric machinery is a general term for the production of non-woven fabric products, and adopts an overall modular design with a compact and reasonable structure. The control part adopts advanced PLC microcomputer control, and the international famous brand frequency converter speed regulation.
Melt blown mold head, Cross forming machine, slitting machine, Non woven fabric winding machine, non-woven high-speed winding machine, non-woven high-speed web forming machine, Netting machine, polyester non-woven fabric sizing and drying equipment Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.pysmachine.com
June 23, 2024