Name: hand trolley/truck Model: HT1805 Load: 200KGS Wheel: 10"x3.50-4 pneumatic Body size(LxW1xH)(mm): 1310x550x460 Toe plate width(W2)(mm): 220 During the injection molding process, when the molten plastic meets in the form of multiple strands in the cavity due to the holes in the insert, the areas where the flow rate is discontinuous, and the area where the filling material flow is interrupted, a linear weld seam is produced because it cannot be completely fused. In addition, when the gate injection molding occurs, a weld seam will also be formed, and the strength and other properties of the weld seam are poor. The main reasons are as follows: Pvc Injection,Precision Plastic Injection Mould,Oem Plastic Injection Crate Mould,Plastic Injection Mould Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com
1. Our Advantage: We have our own factory for processing pneumatic wheel, solid wheel fit for hand truck, wheelbarrow, tool cart, wagon and other slow moving equipment
2. Standard: Top grade, suitable to exporting to USA, UK, AUSTRILIA, UAE, KSA etc.
3. Inventory Control management: MTO production information system, zero inventory.
4. Processing base: Yinzhu, Qingdao, China.
5. Supply capacity yearly: 5000 thousands wheels, 1000 thousand barrows.
6. Place of Origin: Yinzhu, Qingdao, China.
7. Feature: With Puncture proof rubber tire, high air-hoding inner tube, tough&Rusproof rim. Large range of size&pattern for your picking out.
8. Exporting standard and quality: No leaks, clean, enough weight, enough quantity, no damage.
9. Suppying period: All the year round.
10. Sizes &Varieties:
We manufactre full range of Tyre&Tube for wheelbaroow wheel, hand trolley, hand truck, garden trolley, wagon, tralier...
Main tyre sizes as below: 200X50mm, 3.00-4, 3.50-5, 3.50-7, 3.50-8, 4.00-, 4.00-10, 6.50-8 etc
11. Packing: In bundle, mesh bag, carton
12. Weight/Conveyance: 20GP, 40GP, 40HQ.
13. Conventional Terms of payment:
13.1. After sales confirmation signed, 30% T/T repaid, B/L is released as soon as the remainder 70% T/T paid is into our account.
13.2. After sales confirmation signed, 40% T/T repaid, the remainder 60% is paid against Irrevocable and confirmed L/C at sight.
14. Price terms: FOB, CFR and CIF.
15. Lead time: 15-30days after prepayment is arrived.
16. Minimum Order: 1 X 20' FCL.
17. Shipment port: Qingdao port, China.
If you need our quotation, kindly reply to us for size, variety, packing, destination port, terms of price, payment terms and quantity, then we will quote you at best net price.
Welcome to our manufactory, Yiinzhu, Qingdao, China to visit!
For your first cooperation with our manufactory, we hope you to inspect in person during packing and shipment.
Processing:
The injection pressure and speed are too low, and the barrel temperature and mold temperature are too low, resulting in premature cooling of the molten material entering the mold and the appearance of weld seams.
When the injection pressure and speed are too high, injection will occur and weld seams will appear. The speed should be increased, and the back pressure should be increased to reduce the viscosity of the plastic and increase the density. Plastics should be dry well, recycled materials should be used sparingly, and weld seams may occur if the amount of release agent is too much or the quality is not good. Reduce clamping force and facilitate exhaust.
2. Mould:
If there are too many gates in the same cavity, reduce the gate or set it symmetrically, or set it as close as possible to the weld seam. The exhaust at the weld seam is poor, and an exhaust system should be set up. The sprue is too large, the size of the gating system is improper, and the gate is opened to prevent the melt from flowing around the insert hole, or use as few inserts as possible. If the wall thickness changes too much, or the wall thickness is too thin, the wall thickness of the workpiece should be uniform. If necessary, a fusion well should be opened at the fusion seam to separate the fusion seam from the workpiece.
3. Plastic aspects:
Lubricants and stabilizers should be appropriately added to plastics with poor fluidity or heat sensitivity. Plastic contains a lot of impurities, if necessary, replace the plastic with good quality.
Model NO.: ht1805
Surface Handling: Paint
Certification: ISO
Color: Blue
Name: Hand Truck
Model No.: Ht1805
Body Size: 1310*550*460mm
Trademark: oem
Specification: ht1805
Origin: Qingdao, China
HS Code: 871680000
August 20, 2024