· Ford car door can not close the US authorities to investigate 400,000 Fox

According to the Associated Press, due to complaints about the door failure of the Ford Focus model, the US auto safety agency has opened an investigation into the model, involving a total of about 400,000 vehicles.

According to information released by the National Highway Traffic Safety Administration (NHTSA), the survey involved Fox's 2012-2013 model, similar to the survey that resulted in the recall of 456,000 Lincoln MKZ, Ford Fusion and Fiesta models last year.

The NHTSA document showed that the agency received 73 owners complaining that the Fox door was faulty. One of the owners complained that the door rebounded when trying to close the door, causing minor injuries. In other cases, some owners claimed that they had to tie the doors to close them, and some owners were no longer using the Focus because they were worried that the doors would open during driving.

Last year, a Fox owner complained to NHTSA that the driver's door suddenly failed and opened. After calling Ford, he was told that the company had been informed of a large number of failures, but would not initiate a recall. Ford spokesman John Cangany said in an email that the Fox faulty door is similar to the other recalled models, but from different suppliers, and said the company is working with regulators to study how these differences affect the door locks. .

The NHTSA will investigate the frequency of the accident and may eventually initiate a recall.

Plate And Tube Integrated Cutting Machine

1. Plate and tube processing, one machine for two purposes, saving space
2. High-load mechanical structure bed, stable processing and high precision
3. Customized laser generator with small slits and less energy consumption
4. Full stroke chuck, tube diameter up to 220mm
5. Short tail material, cost saving

6. The X-axis frame beam is annealed to eliminate internal stress. After rough machining, vibration and aging are carried out before finishing to ensure the rigidity and stability of the moving parts of the cutting head.
7. The bed is equipped with high-quality linear guides, driven by servo motor, high-quality rack and pinion, so that the Z-axis slide plate can achieve reciprocating motion in the X direction.

8. In the process of movement, the limit switch controls the stroke to limit the limit, and there are elastic buffer pads at both ends to limit the mechanical limit to ensure the safety of the system operation.