High-low temperature test chamber Temperature sensor, temperature controller solution in the event of a malfunction The possible malfunction of the high-low temperature test chamber temperature sensor: Industrial Profiles,Extrusion Industrial Profiles,Industrial Aluminum Profiles,Industrial Aluminium Profiles Sinogar Metal Co.,Ltd , https://www.sedinoalu.com
1. Offset error: The offset value can be adjusted by PID self-tuning.
2. The supplied power supply is ±5V: No power supply VDC + 5V supply work, need to be replaced.
3. Humidity module: No 0-1V output or unable to work according to the actual humidity change or keep at a fixed value, need to be replaced.
4. Level switch: Always ON or OFF or unable to work, need to be replaced.
5. Water level:
1Insufficient control of the water level will often cause poor humidification and heating. If the water level is too high, it will result in insufficient humidification or loss of water and electricity inside the tank. (Add water to adjust the water level.)
2 Water passage blocked, please clear.
6. Humidification pump:
1. The power supply VDC+12V is not available and needs to be replaced.
2. The pump fault often ON/OFF cannot pump, need to be replaced.
7. Humidification heat pipe is damaged: no or no heat, need to be replaced.
High and low temperature chamber temperature controller
1. Offset error: First self-tuning PID, adjust the deviation value after being inaccurate, and make it consistent with the actual correct temperature.
2. Electrical fault: No output or output at the temperature controller output can not be done ONOFF PID control.
3. Internal code setting error: Please restore the internal code value according to the internal code table.
The above is the initial solution to the failure of the temperature sensor and the temperature controller of the high and low temperature high and low temperature test cases. If you can't solve the problem, please contact the technician in the company to contact you for repair.
October 04, 2024