Angle seat valves's Summary:
- Compact in size and lightweight.
- Long service life, economical investment.
- Large flux, small flux resistance, no water hammer.
- Stem automatic correction, self-lubrication, maintenance free.
Angle seat valves's Specifications:
| Control type | Normal closed,normal open,double acting |
| Cylinder material | stainless steel, polyamide PA |
| Pneumatic accessories | Limit switch, locator, solenoid valve, filter relief-pressure valve, manual operating device |
| Medium temperature | PTFE:-30~180ºC   F46:-30~+220ºC |
| Environment temperature | -30~80ºC |
| Nominal pressure | 1.0~1.6MPa |
| Nominal diameter | DN10-50-80mm |
| Connection type | Thread,Flanged, Clamp, Welded |
| Body construction | One-piece, Y-type |
| Body material | 304,316, 316L |
| Spool pressure | 304,316, 316L |
| Seal material | PTFE,F46 |
| Applicable medium | Steam, water, air, oil etc. |
Angle seat valves's installation and disassembly :
1. Based on concrete conditions select the valve installations direction
2. Installation charge of road should be cleaned to ensure no impurites or medium welding slag, so as not to damage the valves, causing leakage.
3. Install welded vavle, be sure to detach the valve actuator
4. Select the appropriate adjustment range of the regulator
5. Ensure that the air pressure range sufficient capacity
6. Check to ensure seal integrity of the connection
7. Valve repair or replacement, the demolition of the body and the connecton in the room temperature, the valve under the state open to avoid damage to the thread
8. Installation and connection in the body the threads coated with a small amount of thread grease, and tighten
Design Character
--Can see the position indication
--Easy to install
--Actuator adopt low abrasion piston structure,big capacity and low wastage
--There is lubricative for inner parts,no need maintaince
--The actuator material have stainless steel, Aluminum and Plastic
--Long life for the piston pole,PTFE seal,avoid the reif come in
--No water hammer effect,when the liquid flowed from valve underside,the water hammer will be absorbed
Â
Angle seat valves's Summary:
- Compact in size and lightweight.
- Long service life, economical investment.
- Large flux, small flux resistance, no water hammer.
- Stem automatic correction, self-lubrication, maintenance free.
Angle seat valves's Specifications:
| Control type | Normal closed,normal open,double acting |
| Cylinder material | stainless steel, polyamide PA |
| Pneumatic accessories | Limit switch, locator, solenoid valve, filter relief-pressure valve, manual operating device |
| Medium temperature | PTFE:-30~180ºC   F46:-30~+220ºC |
| Environment temperature | -30~80ºC |
| Nominal pressure | 1.0~1.6MPa |
| Nominal diameter | DN10-50-80mm |
| Connection type | Thread,Flanged, Clamp, Welded |
| Body construction | One-piece, Y-type |
| Body material | 304,316, 316L |
| Spool pressure | 304,316, 316L |
| Seal material | PTFE,F46 |
| Applicable medium | Steam, water, air, oil etc. |
Angle seat valves's installation and disassembly :
1. Based on concrete conditions select the valve installations direction
2. Installation charge of road should be cleaned to ensure no impurites or medium welding slag, so as not to damage the valves, causing leakage.
3. Install welded vavle, be sure to detach the valve actuator
4. Select the appropriate adjustment range of the regulator
5. Ensure that the air pressure range sufficient capacity
6. Check to ensure seal integrity of the connection
7. Valve repair or replacement, the demolition of the body and the connecton in the room temperature, the valve under the state open to avoid damage to the thread
8. Installation and connection in the body the threads coated with a small amount of thread grease, and tighten
Design Character
--Can see the position indication
--Easy to install
--Actuator adopt low abrasion piston structure,big capacity and low wastage
--There is lubricative for inner parts,no need maintaince
--The actuator material have stainless steel, Aluminum and Plastic
--Long life for the piston pole,PTFE seal,avoid the reif come in
--No water hammer effect,when the liquid flowed from valve underside,the water hammer will be absorbed
Â
Usb Rechargeable Curling Iron,Multi-Function Curling Iron,Durable Rechargeable Curling Iron,Wireless Usb Rechargeable Curling Iron
Pingyang Ruiqiang Home Appliances Factory , https://www.iiyocare.com