Sharpening is an indispensable preparation procedure before drawing die. According to the introduction, the rotary forging machine has been used in the coarse wire rolling abroad. It is also useful for electric rolling, that is, the two ends of the wire are clamped with electric pliers, and then the wire is stretched into a point and broken. At present, all the domestic use of rolling rod tip, mainly the reciprocating rotary old rolling machine and eccentric rolling machine cycle rotation. Another lever manual reciprocating small tip rolling machine, specially for 1 mm below the use of fine steel wire.
Fold and edit the structure of this section sharpening machine
The reciprocating rotary tip rolling machine is used for decades of old equipment, simple structure, suitable for small factories and production of low carbon steel wire.
This equipment is composed of three parts: transmission, frame and rolling stick. It is reduced by belt wheel and gear, and the big gear rotates about 60 times per minute. A short eccentric shaft is attached to the side of the big gear, which makes the rolling stick rotate around 50° through the arm and connecting rod. If the position of the arm and the connecting rod is changed, the Angle of the rolling rod can be changed.
This old fashioned bar is 100~120 mm in diameter and has 8~16 slots. According to the diameter of the wire, slot from large to small in order. Slot compression rate is: coarse steel wire about 20%, medium and fine specification about 15%. The slot is concentric and symmetrical with the outer circle.
The working principle of the sharpening machine is shown in the figure below.
sharpening machine,bar pointing machine,sharpening machinery,tip rolling machine Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com
——The quality of Dongfeng Electronic Technology Automotive Brake System Co., Ltd. has steadily improved. Recently, Dongfeng Electronic Technology Automotive Brake System Co., Ltd. was informed that the company’s Q1 product sales were very good, with self-selling sales revenue increasing substantially. Complete quality assurance is an important reason why the company has achieved such remarkable performance. Since last year, the company has put product quality as a top priority. With excellent projects as the leader, research and technological transformation have taken place, and product quality has steadily increased. Last year, the company creatively implemented "excellent engineering" to manage critical assemblies and parts with high user requirements and difficult control as quality products to improve the customer satisfaction of the product and drive the improvement of key product quality. In order to further promote the development of this activity, the company started from propaganda and education and process control, and continuously improved the quality awareness and responsibility of all employees. At the production site, more than one hundred quality warning pictures were carefully crafted, and the placement positions were rationalized. The special requirements of the customers were converted into internal quality control points of the company, and the employees were always reminded of the quality concept of the customers. In the production process, we will continue to promote the application of SPC technology, use control charts to analyze the processing characteristics of key products, rationally adjust the processing technology of the products, and strictly implement the “responsibility systemâ€, fine punishment, and award meritorious service. The combination of positive and negative incentives has greatly mobilized the enthusiasm of employees, enhanced employees' awareness of process control and quality awareness, and has effectively guaranteed the quality of fine pieces. Excellent quality has won the trust of customers. For the quality “bottleneck†that emerged in the production process, the company set up a research team in time to carry out research. A project team was established to tackle the N1 pump problem. Currently, the improved N1 pump has a stable quality state and has become a popular product in the market. The company also focuses on on-site QC quality technology improvement activities to comprehensively and in-depth product quality improvement. In addition, the measurement room test personnel using technical means to actively design and improve Shenlong parts detection aids, greatly improving the accuracy of dragon parts detection and work efficiency.
May 21, 2024