The tool holder and machine tool are equipped with two tool holders. Each tool holder consists of a base and an upper housing that holds the tool holder. The tool holder base is moved by the stepless speed regulating motor through the toothed belt transmission and the ball screw pair along the guide rail of the beam perpendicular to the machine axis, and the manner in which the upper housing moves along the tool holder rail through its transmission device is similar. of. A combination turning tool with two cutting inserts is clamped in the holder. Through the underground wheel lathe company, the UGD-150N and UGE-150N machines are specially designed for turning wheel sets and un-launched wheel sets that are launched from rolling stock. The machine is equipped with a Sinumerik CNC system. UGD-150N machine This machine is used for routine maintenance of rolling stock. The machine tool is installed on the foundation of the pit, so that a locomotive or vehicle can pass freely on it without hindering the movement of the rolling stock in the maintenance section of the locomotive section. According to special order requirements, the machine can be used for machining on shaft-mounted brake discs. This type of machine can automatically cycle, the main program is to lift, install and fix the wheelset in the axle housing, tool holder positioning, measuring wheel tread, machining, and lowering the wheel pair to the rail. (Finish) Aluminum Rod,Aluminum Rod Bar,Aluminum Hollow Bar,5052 Aluminum Round Bar Shandong Great Steel Co.,Ltd , https://www.great-steel.com
August 08, 2024