1. Electroplating of standard parts Electroplating of standard parts means immersing the parts of the fastener that need to be electroplated into a specific aqueous solution. The aqueous solution will contain some deposited metal compounds, so that after passing through the aqueous solution by electric current, the metal substances in the solution are deposited and adhered tightly. The immersed part of the firmware. Electroplating of standard parts generally includes galvanizing, copper, nickel, chromium, copper-nickel alloy, and the like. 2, standard parts of hot dip galvanizing Hot dip galvanizing of fasteners is to immerse the blown abrasive fasteners of carbon steel into the bath of molten zinc with a heat of about 510 ° C, so that the iron-zinc alloy on the surface of the fastener will turn into blunt Zinc is used to obtain a surface treatment effect. The price of hot dip galvanizing of standard parts is higher than that of electroplating, which is about 1.5 to 2 yuan per kilogram. 3. Mechanical plating of standard parts The mechanical plating of standard parts means that the surface of the standard part is impacted by the specific physical and chemical means with the powder of the plated metal, so that the plated metal forms a coating on the surface of the fastener by cold welding to achieve the surface treatment effect. . Mechanical plating of standard parts is mainly suitable for screws and nuts SS Powder,316L Powder,Steel Powder,Stainless Steel Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtccarbide.com
Standard part surface treatment refers to the process of forming a cover layer on the surface of the fastener by some methods, which can not only improve the corrosion resistance of the standard part itself, but also make the appearance of the fastener more beautiful. Introduction to the three methods of surface treatment of standard parts.
May 26, 2023