Simple transport belt granulator, by a number of bars (typically 2 to 4) output terminal of each belt and the transport belt disposed heavy metals mixing rod is constituted, as shown in FIG. Figure 1 transport belt granulator As can be seen from the figure, it is a belt conveying process to achieve the mixing of the binder and the mineral powder. Each heavy metal is suspended in the mixed stream of the falling ore and the binder, so that the falling materials are remixed and contacted. Under the action of water or solution, the outer layer of wet ore and the dried ore form agglomerates. The inclination of the conveyor belt is generally 15°, and the vertical distance between the pulley at the discharge end and the next belt is about 1.8 m. A heavy metal mixing rod and a water jet are installed in the middle. Adding water or leaching solution requires special attention. It can only spray water onto the ore, and it is not allowed to spray onto the belt. The belt transport speed is generally 1.2-1.5m/s. This granulation equipment is only suitable for mineral powder or fine mud less than 10%. If the mud content is more than 10%, only the disc or drum granulator can be used.
Rebar shear is the ideal solution for cutting all ferrous waste materials and in particular for reducing the volume of steel and various metals. Equipped with 4-edge blades driven by a special hardened steel hydraulic cylinder that allows high productivity at low costs, the alligator shears are also provided with a special geometry designed to always develop, in all work phases, the maximum cutting force. Characterized by numerous innovative elements that make them unique, the crocodile shears are the result of meticulous and careful research and development that the company reserves for each of its products, with a view to an ever-increasing attention to the customer.
Rebar Shear, Rebar Shearing Machine, Steel Rebar Shear, Steel Bar Shear, Bar Shear Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyeya.com
May 31, 2023