A friend drove a commercial vehicle on a business trip, suddenly encountered a rear-end accident on the way, because the time was too late to drag the vehicle to the 4S shop for maintenance. However, after a long period of time, the 4S shop did not inform him about any repairs to the commercial vehicle. Then he called it back and scrutinized it. He instantly wanted to cry. Because the manager in the 4S shop told him that the water tank of the friend's commercial vehicle had water tank leakage before the end of the rear-end, and may not have noticed too much. After the accident, the commercial vehicle will continue to drive. , and then it led to a serious explosion of the cylinder. In fact, the problems caused by the rear-end accident are not very serious, but because of the explosion of the cylinder, the cylinder of the commercial vehicle needs to be replaced again. Therefore, the maintenance cost is now higher than before. Several times. Then, according to some terms and conditions of the vehicle, because the friend's commercial vehicle has been driving for a long time after the accident that has caused a rear-end collision, it has also led to an increase in its loss. Therefore, the insurance company does not claim compensation. This is equal to the fact that, in addition to being just the beginning of the compensation costs caused by the accident, the insurance company can claim compensation, but because of the explosion of the part of the accident, it is necessary for him to pay personally. If the commercial vehicle's cooling system has experienced a failure, it will continue to drive the vehicle. If the vehicle's engine piston will be heated and bent and expand, it will quickly give the cylinder to the engine. Crashes, and even serious fires may occur. Therefore, whether it is a commercial vehicle or other types of vehicles, once there is a traffic accident, if you want to start the vehicle again, then you still need to carefully check the situation under the vehicle to avoid other excessive economic losses. For example, carefully inspect the vehicle's cooling system for leaks, or the operation of the cooling system, as well as chassis, tires, and so on.
Application
•Mainly used as lubricant in PVC,ABS,AS, phenolic resin,etc.
•Well used as dispersing agent in colour masterbatch,coating,etc.
•Commonly used as release agent in rubber
Ethylene bistearic amide (vinyl double stearic amide) a hard and crisp white high melting-point wax, the industrial products are slightly yellow tiny particles, non-toxic, no side effect to human body, insoluble in most of the solvent, under normal temperature of acid-base stability, and water soluble in hot chlorinated hydrocarbons and aromatic hydrocarbon solvents, powdery its satiny feeling is stronger, Compounds that are wettable to water above 80 ° C.
Ethylene Bis Stearamide,Lubricant Ethylene Bis Stearamide,Plastic Ethylene Bis Stearamide,Ethylene Bis Stearamide Powder Hengshui Yimei New Material Technology Co.,Ltd , https://www.oxidizedpewax.com
April 10, 2023